DALY BMS · Home Energy Storage BMS
BMS Inverter Compatibility: How to Check CAN and RS485 Communication for Home Energy Storage
Learn how to check inverter compatibility with a home energy storage BMS. Review DALY LK/LM CAN and RS485 interfaces, listed inverter protocol brands, and the model-level information to confirm before integration.
Introduction
Home energy storage integrators need to confirm that the battery management system (BMS) and inverter can exchange data using a compatible communication protocol. A matching connector or interface alone does not establish compatibility: the inverter model, protocol implementation, firmware and BMS configuration also matter.
The DALY 4th Generation LK and LM home energy storage BMS platform provides communication through two UART ports on the mainboard and CAN and RS485 interfaces on the interface board, according to the product information supplied for this project. This article explains how to evaluate the communication requirement and what information to confirm before selecting a configuration.
01 Understand the Communication Interfaces
UART means Universal Asynchronous Receiver/Transmitter. The supplied LK/LM product facts identify two UART ports on the mainboard.
CAN means Controller Area Network. RS485 is a serial communication standard commonly used in industrial and energy-system equipment. The supplied LK/LM product facts identify CAN and RS485 communication on the interface board.
| Interface | Location | Description |
|---|---|---|
| UART | Mainboard | Two UART ports |
| CAN | Interface board | Controller Area Network communication |
| RS485 | Interface board | Serial communication standard commonly used in industrial and energy-system equipment |
Note: These interface names describe communication methods. They do not, by themselves, identify the exact data protocol or guarantee that a particular inverter model can communicate with the BMS.
02 DALY LK/LM Listed Inverter Protocol Brands
The supplied compatibility information for this LK/LM project lists the following brands by communication type:
RS485 protocol list
Voltronic Power, Growatt, Sacolar, SRNE, Pylon and Deye.
CAN protocol list
Sacolar, Growatt, Victron, GoodWe, Solark, Xtender, SMA, Aiswei, Deye, SOFAR and MUST.
The listed protocols are described in the supplied project materials as having undergone parallel PACK testing and joint debugging for the combinations covered by those materials. This should not be interpreted as universal compatibility with every inverter model from each brand.
03 Why Brand-Level Compatibility Is Not Enough
Inverter manufacturers may offer multiple product families, models and firmware versions. Communication behavior can differ between models and protocol versions, even when products carry the same brand name.
Before confirming compatibility, identify the exact inverter model, its communication port, the required protocol profile and relevant firmware information. The BMS model and selected communication configuration should also be stated.
Key point: Do not infer that a model is supported solely because its brand appears in a compatibility list. Request model-level confirmation for the intended combination.
04 What to Provide for Compatibility Verification
| No. | Information to provide |
|---|---|
| 1 | Inverter brand and exact model number. |
| 2 | Inverter communication interface and required protocol (CAN or RS485). |
| 3 | Inverter firmware version, if available. |
| 4 | DALY BMS model and current configuration. |
| 5 | Battery chemistry and series configuration. |
| 6 | Any required parallel-pack arrangement. |
| 7 | Communication cable or pinout information available from the inverter manufacturer. |
DALY can use these details to review the relevant protocol and configuration. The final compatibility conclusion should be confirmed for the exact BMS/inverter combination.
05 Communication Architecture and Parallel Battery Systems
For projects using multiple battery packs, distinguish communication between BMS units from communication between the battery system and the inverter. These are separate communication links and may use different ports, protocols or wiring arrangements.
The internal communication method and external inverter protocol must be checked against the exact product version and approved wiring documentation. Do not assume that the external CAN or RS485 interface is also the internal parallel communication link.
06 Frequently Asked Questions
Q1: Do DALY LK and LM support CAN and RS485?
A: The supplied LK/LM product facts identify CAN and RS485 communication on the interface board. Confirm the exact ordered configuration.
Q2: Does a listed inverter brand mean every model is compatible?
A: No. Compatibility should be verified for the exact inverter model, protocol and configuration.
Q3: Which inverter brands are listed for RS485?
A: The supplied list includes Voltronic Power, Growatt, Sacolar, SRNE, Pylon and Deye.
Q4: Which inverter brands are listed for CAN?
A: The supplied list includes Sacolar, Growatt, Victron, GoodWe, Solark, Xtender, SMA, Aiswei, Deye, SOFAR and MUST.
Q5: What information is needed to check compatibility?
A: Provide the inverter brand and exact model, communication interface, protocol, firmware information if available, and the selected BMS configuration.
Q6: Does having a CAN or RS485 port guarantee communication?
A: No. The protocol and model-specific implementation must also match.
07 Contact DALY for Inverter Compatibility Review
Before ordering or integrating a home energy storage BMS, send DALY the inverter brand, exact model, required communication protocol, firmware information if available, and battery configuration.
The DALY team can review the information and confirm the applicable LK or LM configuration and the compatibility status for the specific project.
Sources and technical references
Use these references for the claims indicated. Confirm the latest model-specific datasheet and protocol compatibility with DALY before making a project-level commitment.
- DALY — Inverter–BMS Compatibility: Which Inverters Work with a DALY Energy Storage BMS? — Official DALY reference for inverter compatibility and model-level verification.
- DALY — Home Storage BMS product page — General product-family reference; use the current LK/LM datasheet for interface details.
Post time: Nov-20-2026