Smart BMS, Active Balancing BMS, and ESS Storage BMS Solutions — Scalable Configurations from 4S to 24S (30A to 400A Continuous) for Li-ion (NCM), LiFePO4, and LTO Battery Systems

DALY BMS, a direct manufacturer of lithium battery management systems, will exhibit at The Battery Show India 2026, held October 22–24, 2026 at the India Expo Centre & Mart, Greater Noida (Delhi NCR), India — Booth 3-168.

For battery pack builders and OEMs in India’s fast-growing EV and energy storage sectors, managing multiple SKUs for different chemistries and cell counts increases procurement complexity. DALY BMS provides modular hardware platform options that help simplify SKU management and pack assembly.

Configurable BMS Platforms for LiFePO4, NCM, and LTO Chemistries

Selected DALY Smart BMS models support automatic cell-count identification and software-configurable battery chemistry profiles (LiFePO4, NCM, LTO). Across the lineup, DALY offers dedicated hardware designs tailored for 12V, 24V, 48V, and 72V battery systems.

Smart BMS Series (40A to 400A Continuous) for Light EVs and Motive Power

The DALY Smart BMS series provides protection, monitoring, and control for electric two-wheelers, e-rickshaws, light commercial EVs, and industrial utility equipment, offering continuous discharge ratings from 40A to 400A across four sub-series:

Sub-Series	Continuous Current	Primary Application Focus	Key Engineering Considerations
AH	40A / 60A	Light E-scooters, E-bikes	Compact space, standard discharge loads
AK	80A / 100A	E-rickshaws, Cargo Three-Wheelers	Continuous urban stop-and-go load cycles
AM	150A / 200A	E-motorcycles, Light Delivery AGVs	Medium surge current; requires CAN/RS485 controller integration
AS	250A / 300A / 400A	Industrial Forklifts, Utility Vehicles	High peak current tolerance; low internal resistance requirements

Available hardware configurations support Bluetooth app integration along with CAN, RS485, and UART communication interfaces. The boards feature protective injection-molded/potted enclosures for moisture and vibration resistance across operating temperatures from -30°C to 70°C. Selected DALY BMS designs are engineered to support system-level compliance with international standards, including CE, FCC, RoHS, and UL testing requirements. Complete test reports and documentation are available upon request for OEM integration.

Active Balancing BMS — Optimized for Cell Consistency and Capacity Retention

For battery packs experiencing cell capacity imbalance over long cycle lives, DALY’s Active Balancing BMS integrates active energy transfer. The TH/TK/TM/TS series provides continuous active balancing current up to 1A via a transformer-based architecture, while the TC series offers up to 0.5A balancing. Selected models support parallel battery pack configurations (up to 16 units with integrated parallel management) and include pre-configured communication protocols for major inverter brands, including Deye, Victron Energy, Growatt, and SMA.

4th Generation Home ESS BMS (LK/LM Series, 100A–200A)

Engineered specifically for residential solar energy storage and telecom backup systems, the LK (100A) and LM (150A/200A) series support 8S–16S LiFePO4 configurations. Features include pre-configured protocols for 14 major inverter brands (such as Deye, Victron, Growatt, and SMA), integrated parallel current-limiting protection (up to 16 packs), and optional Bluetooth/Wi-Fi/4G communication modules for remote monitoring.

Engineering Checklist: How to Request a Custom BMS Selection

To obtain a precise BMS recommendation and quotation from DALY engineers, please prepare the following five system parameters:

1. Battery Chemistry & Series Count (S): e.g., 16S LiFePO₄ (51.2V nominal) or 20S NCM (74V nominal).

2. Current Requirements: Continuous discharge current (A) and Peak/Surge current (A) with duration (seconds).

3. System Application: e.g., Electric Rickshaw, Industrial AGV, Marine Power, or Residential Solar ESS.

4. Communication & Protocols: Required bus ports (CAN, RS485, UART) and target controller/inverter model.

5. Balancing Requirement: Passive balancing (standard) or Active balancing (for large-capacity or high-cycle applications).

Connect with DALY Technical Engineers at Booth 3-168

Planning your visit to The Battery Show India 2026? Visit Booth 3-168 to evaluate live hardware samples, test app-based configuration interfaces, and discuss direct factory supply options.

• At the Booth: Bring your battery pack specifications (Chemistry, Series Count, Continuous/Peak Current, Inverter Model) to receive an immediate technical assessment and selection proposal.
• Online/Pre-Show Technical Inquiries: Can't attend in person? Submit your technical requirements via email to dalybms@dalyelec.com or visit https://www.dalybms.com/. Our engineering support team will provide a tailored BMS selection proposal and formal quote within 24 business hours.

About DALY BMS

Founded in 2015, DALY BMS is a global manufacturer specializing in research, development, and production of lithium battery management systems. Serving clients across 130+ countries and regions, DALY’s product portfolio includes Smart BMS, Active Balancing BMS, and Home ESS BMS platforms ranging from 30A to 400A continuous ratings, catering to electric mobility, residential storage, telecom backup, and industrial battery applications.

Production-Ready SEO Metadata

• Meta Title (58 chars): DALY BMS at The Battery Show India 2026 | Booth 3-168
• Meta Description (158 chars): Explore DALY Smart BMS, Active Balancing BMS, and Home ESS BMS (30A-400A) for LiFePO4 and NCM packs at The Battery Show India 2026, Greater Noida, Booth 3-168.
• Target Keywords: daly bms, daly smart bms, active balancing bms, lifepo4 bms, battery show india 2026, ev bms manufacturer
• Suggested URL Slug: `/news/daly-bms-battery-show-india-2026/`